 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PSD60 Series 60 Watt Quad Output AC/DC Power Supply FEATURES 2 Year Warranty LED Indicator for Power On 100% Full Load Burn-In Tested Cooling by Free Air Convection Universal AC Input / Full Range Fixed Switching Frequency at 35KHz Built-In EMI Filter, Low Ripple and Noise Soft-Start Circuit, Limiting AC Surge Current Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: PSQ60 Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range 85 ~ 264VAC (120 ~ 370VDC) Input Frequency 47 to 63Hz AC Current (typical) 2A @ 115VAC 0.8A @ 230VAC Inrush Current (typical) Cold Start 15A @ 115VAC 30A @ 230VAC Leakage Current < 1mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Power See Table PSQ60-B: CH.1: 2.0% CH.2: 6.0% CH.3: 5.0% CH.4: 5.0% Voltage Tolerance (See Note 3) PSQ60-C: CH.1: 2.0% CH.2: +8, -4% CH.3: 5.0% CH.4: 5.0% PSQ60-D: CH.1: 2.0% CH.2: 6.0% CH.3: +8, -4% CH.4: 5.0% Voltage Adjustment Range CH.1: 4.75 ~ 5.5V PSQ60-B: CH.1: 0.5% CH.2: 1.0% CH.3: 0.5% CH.4: 0.5% Line Regulation (See Note 4) PSQ60-C: CH.1: 0.5% CH.2: 2.0% CH.3: 0.5% CH.4: 0.5% PSQ60-D: CH.1: 0.5% CH.2: 1.0% CH.3: 2.0% CH.4: 0.5% PSQ60-B: CH.1: 0.5% CH.2: 4.0% CH.3: 1.0% CH.4: 1.0% Load Regulation (See Note 5) PSQ60-C: CH.1: 0.5% CH.2: 4.0% CH.3: 1.0% CH.4: 1.0% PSQ60-D: CH.1: 0.5% CH.2: 4.0% CH.3: 4.0% CH.4: 1.0% Output Current See Table Ripple & Noise (max) (See Note 2) See Table Setup, Rise Time 800ms, 20ms @ 230VAC 1600ms, 20ms @ 115VAC and full load Hold Up Time (typical) 70ms @ 230VAC 15ms @ 115VAC and full load Temperature Coefficient 0.03%/C (0 ~ 50C) on +5V output PROTECTION 105 ~ 150%/115VAC rated output power Overload Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. 5V: 5.75 ~ 6.75VDC Over Voltage Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. GENERAL SPECIFICATIONS Efficiency (typical) See Table Switching Frequency 35KHz Withstand Voltage 3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG) Isolation Resistance 100M/500DC (Input to Output, Input to FG, and Output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity 20 ~ 90% RH non-condensing Storage Humidity 10 ~ 95% RH Cooling Free air convection Vibration 10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes. MTBF 284,800 hours min. @ 25C (MIL-HDBK-217F) PHYSICAL SPECIFICATIONS Weight 550 grams Dimensions 159(L) x 97(W) x 38(H) mm Warranty 2 years SAFETY & EMC (See Note 7) Safety Standards UL60950-1, Approved EMI Conduction & Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A o Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSD60 Series 60 Watt Quad Output AC/DC Power Supply OUTPUT VOLTAGE / CURRENT RATING CHART Model Number CH: 1 CH: 2 CH: 3 CH. 4 CH: 1 CH: 2 CH: 3 CH. 4 CH: 1 CH: 2 CH: 3 CH. 4 Input Voltage 85 ~ 264VAC (120 ~ 370VDC) 85 ~ 264VAC (120 ~ 370VDC) 85 ~ 264VAC (120 ~ 370VDC) Output Voltage 5 VDC 12 VDC -5 VDC -12 VDC 5 VDC 15 VDC -5 VDC -15 VDC 5 VDC 12 VDC 24 VDC -12 VDC Rated Output Current 5.5A 2A 0.5A 0.5A 5.5A 1.5A 0.5A 0.5A 4A 1A 1A 0.5A Output Current Range 0.5 ~ 8A 0.1 ~ 3A 0 ~ 1A 0 ~ 1A 0.5 ~ 8A 0.1 ~ 3A 0 ~ 1A 0 ~ 1A 0.5 ~ 8A 0.1 ~ 3A 0.1 ~ 1.5A 0 ~ 1A Ripple & Noise 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 150mVp-p 120mVp-p Rated Output Power 60W Efficiency PSQ60-B 70% PSQ60-C 60W 72% PSQ60-D 62W 75% NOTES 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor. 3. Tolerances include set up tolerance, line regulation, and load regulation. 4. Line Regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load and auxiliary outputs at 60% rated load. 6. Each output provides up to maximum current but total load can not exceed maximum output power. 7. The power supply is considered a component, which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. DERATING CURVE STATIC CHARACTERISTICS Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 PSD60 Series 60 Watt Quad Output AC/DC Power Supply MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Pin No. Assignment 1 AC/L 2 AC/N 3 FG 4 DC OUTPUT -V1 5 DC OUTPUT -V2 6 DC OUTPUT +V2 7 DC OUTPUT COM 8 DC OUTPUT +V1 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of PSQ60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |